ZyXEL ZyWALL USG 2000 User Guide - Page 291
Object References
View all ZyXEL ZyWALL USG 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 291 highlights
Chapter 13 Interfaces Table 59 Configuration > Network > Interface > Ethernet > Edit (continued) LABEL DESCRIPTION Text Authentication Key This field is available if the Authentication is Text. Type the password for text authentication. The key can consist of alphanumeric characters and the underscore, and it can be up to eight characters long. MD5 This field is available if the Authentication is MD5. Type the ID for Authentication MD5 authentication. The ID can be between 1 and 255. ID MD5 Authentication Key This field is available if the Authentication is MD5. Type the password for MD5 authentication. The password can consist of alphanumeric characters and the underscore, and it can be up to 16 characters long. MAC Address Setting This section appears when Interface Properties is External or General. Have the interface use either the factory assigned default MAC address, a manually specified MAC address, or clone the MAC address of another device or computer. Use Default MAC Address Select this option to have the interface use the factory assigned default MAC address. By default, the ZyWALL uses the factory assigned MAC address to identify itself. Overwrite Default MAC Address Select this option to have the interface use a different MAC address. Either enter the MAC address in the fields or click Clone by host and enter the IP address of the device or computer whose MAC you are cloning. Once it is successfully configured, the address will be copied to the configuration file. It will not change unless you change the setting or upload a different configuration file. Related Setting Configure PPPoE/PPTP Click PPPoE/PPTP if this interface's Internet connection uses PPPoE or PPTP. Configure VLAN Click VLAN if you want to configure a VLAN interface for this Ethernet interface. Configure WAN TRUNK Click WAN TRUNK to go to a screen where you can set this interface to be part of a WAN trunk for load balancing. Configure Policy Route Click Policy Route to go to the policy route summary screen where you can manually associate traffic with this interface. OK Cancel You must manually configure a policy route to add routing and SNAT settings for an interface with the Interface Type set to General. You can also configure a policy route to override the default routing and SNAT behavior for an interface with an Interface Type of Internal or External. Click OK to save your changes back to the ZyWALL. Click Cancel to exit this screen without saving. 13.3.2 Object References When a configuration screen includes an Object References icon, select a configuration object and click Object References to open the Object References screen. This screen displays which configuration settings reference the selected object. The fields shown vary with the type of object. ZyWALL USG 2000 User's Guide 291