ZyXEL ZyWALL USG 2000 User Guide - Page 730

Chapter 44 AAA Server Click Configuration > Object > AAA Server > RADIUS to display the RADIUS screen. Figure 485 Configuration > Object > AAA Server > RADIUS The following table describes the labels in this screen. Table 205 Configuration > Object > AAA Server > RADIUS LABEL DESCRIPTION Add Click this to create a new entry. Edit Double-click an entry or select it and click Edit to open a screen where you can modify the entry's settings. Remove To remove an entry, select it and click Remove. The ZyWALL confirms you want to remove it before doing so. Object References Select an entry and click Object References to open a screen that shows which settings use the entry. See Section 13.3.2 on page 291 for an example. # This field displays the index number. Name This is the name of the RADIUS server entry. Server Address This is the address of the AD or LDAP server. Base DN This specifies a directory. For example, o=ZyXEL, c=US. Host Enter the IP address (in dotted decimal notation) or the domain name (up to 63 alphanumeric characters) of a RADIUS server. Authentication Port The default port of the RADIUS server for authentication is 1812. You need not change this value unless your network administrator instructs you to do so with additional information. Key Enter a password (up to 15 alphanumeric characters) as the key to be shared between the external authentication server and the ZyWALL. Timeout The key is not sent over the network. This key must be the same on the external authentication server and the ZyWALL. Specify the timeout period (between 1 and 300 seconds) before the ZyWALL disconnects from the RADIUS server. In this case, user authentication fails. Apply Reset Search timeout occurs when either the user information is not in the RADIUS server or the RADIUS server is down. Click Apply to save the changes. Click Reset to return the screen to its last-saved settings. 730 ZyWALL USG 2000 User's Guide