ZyXEL ZyWALL USG 2000 User Guide - Page 306
result in higher fees or roaming charges if it uses other
View all ZyXEL ZyWALL USG 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 306 highlights
Chapter 13 Interfaces Table 65 Configuration > Network > Interface > Cellular > Add (continued) LABEL DESCRIPTION Get Select this option If your ISP did not assign you a fixed IP address. Automatically This is the default selection. Use Fixed IP Address Select this option If the ISP assigned a fixed IP address. IP Address Enter the cellular interface's WAN IP address in this field if you selected Use Fixed IP Address. Metric Enter the priority of the gateway (if any) on this interface. The ZyWALL decides which gateway to use based on this priority. The lower the number, the higher the priority. If two or more gateways have the same priority, the ZyWALL uses the one that was configured first. Device Settings Device Selection Select the 3G card to use with this entry or select auto to have the ZyWALL automatically detect the type of card. Band Selection This field appears if you selected a 3G device that allows you to select the type of network to use. Select the type of 3G service for your 3G connection. If you are unsure what to select, check with your 3G service provider to find the 3G service available to you in your region. Select auto to have the card connect to an available network. Choose this option if you do not know what networks are available. You may want to manually specify the type of network to use if you are charged differently for different types of network or you only have one type of network available to you. Select GPRS / EDGE (GSM) only to have this interface only use a 2.5G or 2.75G network (respectively). If you only have a GSM network available to you, you may want to select this so the ZyWALL does not spend time looking for a WCDMA network. Enable Budget Control Select UMTS / HSDPA (WCDMA) only to have this interface only use a 3G or 3.5G network (respectively). You may want to do this if you want to make sure the interface does not use the GSM network. Select this to set a monthly limit for the user account of the installed 3G card. You can set a limit on the total traffic and/or call time. The ZyWALL takes the actions you specified when a limit is exceeded during the month. Time Budget Note: The ZyWALL automatically uses whichever service provider's 3G network to which it can connect. This could result in higher fees or roaming charges if it uses other service providers' networks, especially if your 3G provider has poor coverage in your area or you frequently move your ZyWALL to different locations. Select this and specify the amount of time (in hours) that the 3G connection can be used within one month. If you change the value after you configure and enable budget control, the ZyWALL resets the statistics. 306 ZyWALL USG 2000 User's Guide