ZyXEL ZyWALL USG 2000 User Guide - Page 316
infinite, days, hours, and minutes, IP Pool Start, Address, Pool Size, BiDir, In-Only, Out-Only,
View all ZyXEL ZyWALL USG 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 316 highlights
Chapter 13 Interfaces Table 67 Configuration > Network > Interface > VLAN > Edit (continued) LABEL DESCRIPTION Lease time Specify how long each computer can use the information (especially the IP address) before it has to request the information again. Choices are: infinite - select this if IP addresses never expire days, hours, and minutes - select this to enter how long IP addresses are valid. Enable IP/MAC Binding Select this option to have the ZyWALL enforce links between specific IP addresses and specific MAC addresses for this VLAN. This stops anyone else from manually using a bound IP address on another device connected to this interface. Use this to make use only the intended users get to use specific IP addresses. Enable Logs for IP/MAC Binding Violation Select this option to have the ZyWALL generate a log if a device connected to this VLAN attempts to use an IP address that is bound to another device's MAC address. Static DHCP Table Configure a list of static IP addresses the ZyWALL assigns to computers connected to the interface. Otherwise, the ZyWALL assigns an IP address dynamically using the interface's IP Pool Start Address and Pool Size. Add Click this to create a new entry. Edit Select an entry and click this to be able to modify it. Remove Select an entry and click this to delete it. # This field is a sequential value, and it is not associated with a specific entry. IP Address Enter the IP address to assign to a device with this entry's MAC address. MAC Address Enter the MAC address to which to assign this entry's IP address. Description Enter a description to help identify this static DHCP entry. You can use alphanumeric and characters, and it can be up to 60 characters long. RIP Setting See Section 16.2 on page 364 for more information about RIP. Enable RIP Select this to enable RIP on this interface. Direction This field is effective when RIP is enabled. Select the RIP direction from the drop-down list box. BiDir - This interface sends and receives routing information. In-Only - This interface receives routing information. Send Version Receive Version V2-Broadcast Out-Only - This interface sends routing information. This field is effective when RIP is enabled. Select the RIP version(s) used for sending RIP packets. Choices are 1, 2, and 1 and 2. This field is effective when RIP is enabled. Select the RIP version(s) used for receiving RIP packets. Choices are 1, 2, and 1 and 2. This field is effective when RIP is enabled. Select this to send RIP-2 packets using subnet broadcasting; otherwise, the ZyWALL uses multicasting. 316 ZyWALL USG 2000 User's Guide