ZyXEL ZyWALL USG 2000 User Guide - Page 952
Application Error Code
View all ZyXEL ZyWALL USG 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 952 highlights
Appendix A Log Descriptions Table 284 Interface Logs (continued) LOG MESSAGE DESCRIPTION Interface %s connect failed: MS-CHAP authentication failed. MS-CHAP authentication failed (the server must support MSCHAP and verify that the authentication failed, this does not include cases where the server does not support MS-CHAP). %s: interface name. Interface %s connect failed: CHAP authentication failed. CHAP authentication failed (the server must support CHAP and verify that the authentication failed, this does not include cases where the server does not support CHAP). CHAP: interface name. Interface %s is connected. A PPP or AUX interface connected successfully. %s: interface name. Interface %s is disconnected. A PPP or AUX interface disconnected successfully. %s: interface name. Interface %s connect failed: Peer not responding. The interface's connection will be terminated because the server did not send any LCP packets. %s: interface name. Interface %s connect failed: PAP authentication failed. PAP authentication failed (the server must support PAP and verify verify that the authentication failed, this does not include cases where the server does not support PAP). %s: PPP interface name. Interface %s connect failed: Connect timeout. A PPPOE connection timed out due to a lack of response from the PPPOE server. %s: PPP interface name. Interface %s create failed because has no member. A bridge interface has no member. %s: bridge interface name. "Interface cellular The listed error code (%d) was generated due to an internal Application Error Code cellular interface error. %d\n. "An error [%d] occurred while negotiating with the device in %s. Please try to remove then insert the device. The listed error code (%d) happened when the ZyWALL attempted to negotiate with the cellular device installed in (or connected to) the listed slot (%s). Remove and reinstall the device. "Unable to negotiate with the device in %s. Please try to remove then insert the device. The ZyWALL could not negotiate with the cellular device installed in (or connected to) the listed slot (%s). Remove and reinstall the device. "Unable to configure the selected frequency band to the device in %s. Please try to remove then insert the device. The ZyWALL failed to set the cellular device installed in (or connected to) the listed slot (%s) to use the frequency band you configured. The cellular device may not support the band or you may need to try removing and reinstalling the device. "PIN code is required for inteface cellular%d. Please check the PIN code setting. The PIN code configured for the listed cellular interface (%d) is incorrect or missing. 952 ZyWALL USG 2000 User's Guide