ZyXEL ZyWALL USG 2000 User Guide - Page 674
Configuration > Device HA > Active-Passive Mode continued
View all ZyXEL ZyWALL USG 2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 674 highlights
Chapter 39 Device HA Table 179 Configuration > Device HA > Active-Passive Mode (continued) LABEL DESCRIPTION Monitored Interface Summary This table shows the status of the device HA settings and status of the ZyWALL's interfaces. Edit Select an entry and click this to be able to modify it. Activate To turn on an entry, select it and click Activate. Inactivate To turn off an entry, select it and click Inactivate. # This is the entry's index number in the list. Status The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is inactive. Interface This field identifies the interface. At the time of writing, Ethernet and bridge interfaces can be included in the active-passive mode virtual router. The member interfaces of any bridge interfaces do not display separately. Virtual Router IP / Netmask This is the master ZyWALL's (static) IP address and subnet mask for this interface. If a backup takes over for the master, it uses this IP address. These fields are blank if the interface is a DHCP client or has no IP settings. Management IP This field displays the interface's management IP address and subnet / Netmask mask. You can use this IP address and subnet mask to access the ZyWALL whether it is in master or backup mode. Link Status This tells whether the monitored interface's connection is down or up. Synchronization Use synchronization to have a backup ZyWALL copy the master ZyWALL's configuration, certificates, AV signatures, IDP and application patrol signatures, and system protect signatures. Server Address Every interface's management IP address must be in the same subnet as the interface's IP address (the virtual router IP address). If this ZyWALL is set to backup role, enter the IP address or FullyQualified Domain Name (FQDN) of the ZyWALL from which to get updated configuration. Usually, you should enter the IP address or FQDN of a virtual router on a secure network. Sync. Now Server Port If this ZyWALL is set to master role, this field displays the ZyWALL's IP addresses and/or Fully-Qualified Domain Names (FQDN) through which ZyWALLs in backup role can get updated configuration from this ZyWALL. This displays if the ZyWALL is set to use active-passive mode device HA, the ZyWALL is in the backup role and device HA is enabled. Click this to copy the specified ZyWALL's configuration. If this ZyWALL is set to the backup role, enter the port number to use for Secure FTP when synchronizing with the specified master ZyWALL. If this ZyWALL is set to master role, this field displays the ZyWALL's Secure FTP port number. Click the link if you need to change the FTP port number. Every ZyWALL in the virtual router must use the same port number. If the master ZyWALL changes, you have to manually change this port number in the backups. 674 ZyWALL USG 2000 User's Guide