2007 BMW 6 Series Owner's Manual - Page 42

Opening and closing > Press the switch beyond the resistance point: All windows open automatically. Pressing the switch again stops the opening movement. Briefly press button 1 again to deactivate the function. The LEDs go out. After switching off ignition You can still operate the windows with the remote control removed or the ignition switched off for approx. 1 minute, as long as neither of the doors has been opened. Pinch protection system If the closing force exceeds a specific value as a window closes, the closing action is interrupted and the window reopens slightly. Despite the pinch protection system, inspect the window's travel path prior to closing it, as the safety system might fail to detect certain kinds of obstructions, such as thin objects, and the window would continue closing. Do not install any accessories in the range of movement of the windows, otherwise the pinch protection system will be impaired. Convertible: the rear side windows and rear window are not equipped with a pinch protection system. Therefore, watch the rear side windows and the rear window during closing, otherwise injuries can occur.< Rear window 1. Briefly press button 1: The LEDs in button 1 and switch 2 light up for approx. 10 seconds. 2. Press switch 2: > Down to the resistance point: The rear window continues to open for as long as you hold down the switch. You can close the rear window in the same manner by pulling the switch. > Press the switch beyond the resistance point: The rear window opens automatically. Pressing the switch again stops the opening movement. Briefly press button 1 again to deactivate the function. The LEDs go out. The rear window opens and closes automatically when you open or close the convertible top.< For information on using the comfort operation mode at the door lock or with the remote control, refer to page 31 or 32. Coupe: for information on comfort closing with comfort access, refer to page 37. Closing without pinch protection system In case of danger from outside or if, for example, ice on the window prevents normal closing, proceed as follows: 1. Pull the switch beyond the resistance point and hold. The pinch protection system is limited and the window opens slightly if the closing force exceeds a certain value. 2. Pull the switch beyond the resistance point and hold again within approx. 4 seconds. The window closes without the pinch protection system. 40 Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG