2007 BMW 6 Series Owner's Manual - Page 52

Adjusting Seat, mirror and steering wheel memory The adjusting procedure for the steering wheel is interrupted if you briefly press the switch for the steering wheel adjustment in any direction, refer to page 55. Safety feature 1. Close the driver's door and switch ignition on or off, refer to page 59. 2. Press the desired memory button 1, 2 or 3 and maintain pressure until the adjustment process has been completed. You can store and select three different adjustment settings for the driver's seat, exterior mirrors and steering wheel. The adjustment of the lumbar support is not stored in the memory. If the button was pressed inadvertently: press the button again; the LED goes out. Activating with remote control The last positions of the driver's seat, external rearview mirrors, and steering wheel are stored for the remote key currently in use. You can choose when the position is requested: > Request when unlocking vehicle > Request when opening driver's door When using this feature, always make sure that the footwell behind the driver's seat is empty and unobstructed. If you fail to do so, any persons or objects behind the seat could be injured or damaged by a rearward movement of the seat.< The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. iDrive, for explanation of principle, refer to page 16. 1. Open the start menu. 2. Press the controller to open the menu. 3. Select "Settings" and press the controller. 4. Select "Vehicle / Tires" and press the controller. 5. Change to upper field if necessary. Turn the controller until "Door locks" is selected and press the controller. Storing 1. Switch on radio readiness or ignition, refer to page 59. 2. Adjust the desired seat, exterior mirror and steering-wheel positions. 3. Press the button: The LED in the button lights up. 4. Press the desired memory button 1, 2 or 3: The LED goes out. Requesting Do not request a position from the memory while the vehicle is moving. There is a risk of accident from unexpected movement of the seat or steering wheel.< Comfort mode 1. Open the driver's door after unlocking or switch on radio readiness, refer to page 59. 2. Briefly press the desired memory button 1, 2 or 3. The system cancels the adjustment procedure when you briefly press one of the seat adjustment switches or one of the memory buttons. 50 Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG