1996 Chevrolet S10 Pickup Owner's Manual - Page 86
1996 Chevrolet S10 Pickup Manual
Page 86 highlights
If a bulb is burned out, replace it to help avoid an accident. If the arrows don't go on at all whenyou signal a turn, check the fuse (see"Fuses and Circuit Breakers" in the Index) and for burned-out bulbs. If you have a trailer towing option with added wiring for the trailer lamps, a different turn signal flasher is used. With this flasher installed, the signal indicator will flash even if a turn signal bulb is burned out. Check the front and rear turn signallamps regularly to make sure they are working. Windshield Wipers You control the windshield wipers by turning the band with the wiper symbol on it. Headlamp High/Low Beam Changer To change the headlamps from low-beam to high or high to low, pull the multifunction lever all the way toward you. Then release it. When the high-beam headlamps are on, this indicator light on the instrument panel also will be on. For a single wiping cycle, turn the band to MIST. Hold it there until the wipersstart, then let go. The wipers will stop after one wipe. If you want more wipes, hold the band on MIST longer. You can set the wiper speed a long or short delay for between wipes. This can be very useful inlight rain or snow. Turn the band choose the delay time. The to closer to LOW, the shorter the delay. For steady wiping atlow speed, turn the band away from you to the LOW position. For high-speed wiping, turn the band further,to HIGH. To stop the wipers, move the bandto the OFF position. 2-35