2003 Pontiac Grand Prix Owner's Manual - Page 128

Windshield Wipers To operate the windshield wipers, turn the band marked WIPER located on the multifunction lever, upward or downward. MIST: Turn the band to MIST for a single wiping cycle. Hold it there until the windshield wipers start, then let it go. The windshield wipers will stop after one cycle. For more cycles, hold the band on MIST longer. Be sure to clear ice and snow from the wiper blades before using them. If they're frozen to the windshield, carefully loosen or thaw them. If the blades do become damaged, get new blades or blade inserts. Heavy snow or ice can overioad the wipers. A circuit breaker will stop them until the motor cools. Clear away snow or ice to prevent an overload. Windshield Washer Press the paddle with the word PUSH and f the washer symbol on it, located on top o the multifunction lever, to spray washer fluid on the windshield. The wipers will clear the windshield ana then either stop or return to the se' -peed. OFF: Turn the band to OFF to turn the windshield wipers off. 0PUSH: DELAY (Delayed Wiping): Turn the band upward to choose one of the five delay settings. For longer periods of time between wiper blade cycles, select a low setting. For shorter periods of time between wiper blade cycles, select a higher setting. The further the band is turned upward, the longer the delay between wiper cycles. LOW: Turn the band to LOW for steady wiping at a low speed. HIGH: Turn the band to HIGH for steady wiping at a high speed. In freezing weather, don't use your washer until the windshield is warmed. Otherwise the washer fluid can form ice on the windshield, blocking your vision. 3-7