2006 Subaru B9 Tribeca Owner's Manual - Page 105

Keys and doors 2-11 crease. Replace the battery as soon as possible. To replace the battery: 0 er. can be programmed), you should re-program all of your transmitters for security reasons. It is recommended that you have your dealer program all of your transmitters into your system. 1 200717 200715 Programming the transmitters The keyless entry system is equipped with a special code learning feature that allows you to program new transmitter codes into the system or to delete old ones. The system can learn up to four unique transmitter codes. The four transmitter codes may be the same or different. Programming transmitter codes into system: 1) Negative (-) side facing up 1. Open the transmitter case using a flathead screwdriver. 3. Replace with a new battery (Type CR2025 or equivalent) making sure to install the new battery with the negative (-) side facing up. 4. Refit the removed half of the transmitter case. After the battery is replaced, the transmitter must be synchronized with the keyless entry system's control unit. Press either the " " or " " button six times to synchronize the unit. Replacing lost transmitters 200716 200718 2. Remove the old battery from the hold- If you lose a transmitter or want to purchase additional transmitters (up to four Bag containing transmitter - CONTINUED -