2006 Subaru B9 Tribeca Owner's Manual - Page 339

Maintenance and service 11-43 Backup light/Tail light 1 2. Turn the bulb socket counterclockwise and remove it. 3. Pull the bulb out of the bulb socket and replace it with a new one. 4. Install the bulb socket by turning it clockwise. Install the light cover on the rear gate. 2 Rear gate light B00349 1) Brake/tail light 2) Rear turn signal light B00350 3. Remove the bulb holder from the rear combination light assembly by turning it counterclockwise. 4. Remove the bulb from the socket by pushing it and turning counterclockwise. Install a new bulb. 5. Set the bulb holder into the rear combination light assembly and turn it clockwise until it locks. 6. Close the cover and latch the lock. 7. Reinstall the rear combination light assembly. 1. Use a flat-head screwdriver to remove the light cover from the rear gate trim. 1 B00350 2 1. Use a flat-head screwdriver to remove the rear gate light assembly from the rear gate trim. B00351 1) Tail light 2) Backup light - CONTINUED -