2006 Subaru B9 Tribeca Owner's Manual - Page 300
2006 Subaru B9 Tribeca Manual
Page 300 highlights
11-4 Maintenance and service Wear adequate eye protection to guard against getting oil or fluids in your eyes. If something does get in your eyes, thoroughly wash them out with clean water. Do not tamper with the wiring of the SRS airbag system or seatbelt pretensioner system, or attempt to take its connectors apart, as that may activate the system or it can render it inoperative. The wiring and connectors of these systems are yellow for easy identification. NEVER use a circuit tester for these wiring. If your SRS airbag or seatbelt pretensioner needs service, consult your nearest SUBARU dealer. Always let the engine cool down. Engine parts become very hot when the engine is running and remain hot for some time after the engine is stopped. Do not spill engine oil, engine coolant, brake fluid or any other fluid on hot engine components. This may cause a fire. Always remove the key from the ignition switch. When the ignition switch is in the "ON" position, the cooling fan may operate suddenly even when the engine is stopped. Engine hood B00300 Before checking or servicing in the engine compartment When you do checking or servicing in the engine compartment while the engine is running To open the hood: 1. If the wiper blades are lifted off the windshield, return them to their original positions. 2. Pull the hood release knob under the instrument panel. Always stop the engine and set the parking brake firmly to prevent the vehicle from moving. A running engine can be dangerous. Keep your fingers, hands, clothing, hair and tools away from the cooling fan, belts and any other moving engine parts. Removing rings, watches and ties is advisable.