BenQ RM8602K Installation Handbook - Page 11
Extending the VGA connection using a VGA amplifier/repeater
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Extending the VGA connection using a VGA amplifier/repeater If you need to connect the display to a computer or other VGA source devices over a long distance (over 3 meters), a VGA signal amplifier must be used to boost the signal and prevent potential display quality problems like interference and ghosting. 1. Connect the VGA input jack on the display to the VGA output jack on the VGA signal amplifier/repeater using a D-Sub (15-pin) cable. 2. Connect the VGA output jack on the computer to the VGA input jack on the VGA signal amplifier/repeater using a D-Sub (15-pin) cable. 3. Connect the computer's audio output jack to the audio input jack on the display using a suitable audio cable. VGA input jack Display Audio input jack Audio cable D-Sub (15-pin) cable VGA signal amplifier/repeater D-Sub (15-pin) cable Computer • Refer to the User Manual of your display for the location of VGA and corresponding audio input jacks. • The audio cable, VGA signal amplifier/repeater and additional VGA cable are not supplied and should be purchased separately. Display installation guide 11