BenQ RM8602K Installation Handbook - Page 21
Video wall installation guide, Precautions, Notes on moving the display, Installing
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Video wall installation guide To ensure safety, please read this manual carefully before installation and follow the instructions herein. Store this installation guide in a secure place for future reference. At the end of this Installation Handbook are installation checklists that help you to ensure the necessary steps have been completed. Make sure to have the checklists by hand before performing a new installation. Precautions • The video wall must be installed on a flat and level surface which is strong enough to bear its weight. • If the video wall is mounted with mounting brackets, make sure the brackets are tightened and secured on the wall and are strong enough to bear the weight of the video wall. • The Liquid Crystal Display (LCD) panel of the display has a very thin protective layer of glass which is liable to marking or scratching, and cracking if struck or pressured. Please protect the display with cushions during video wall installation. • Move a display by holding the handles on the back of the display. Do not touch the LCD panel directly to avoid possible scratches. • To maintain proper ventilation and heat dissipation, keep at least 60 mm of clear space from the mounted displays to the wall. • Ensure enough gap between displays to protect your LCD screens from the damage through the direct transfer of weight. See Checking the safe distance between displays on page 23 for details. Notes on moving the display The display has limited mechanical strength. To prevent the display from performance failure caused by line defects, front bezel bending, glass scratch/broken, light leakage, etc, it must be handled with care. Refer to Notes on moving the display on page 5. Installing You can cascade the displays in landscape or portrait mode as desired. Mind the space between displays during installation. Cascading displays in landscape or portrait mode 1. Install the mounting bracket to the wall following the instruction manual of the wall mounting bracket. Make sure the mounting bracket is vertically and horizontally placed. 2. Attach the provided gap inspection pads to the display edges as instructed in Step 1~3 in Checking the safe distance between displays on page 23. 3. Mount and fasten the display on the mounting bracket or stand by tightening the screws through the respective holes with a Phillips (cross) screwdriver. Do not place one display directly on another as the stacked LCD screens may be damaged by the weight. Video wall installation guide 21