BenQ RM8602K Installation Handbook - Page 68
Audio, Remote control, Windows Update, Speaker, DisplayPort, Audio Source
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
The display flickers when I launch or close a program. • The signal may not be stable. Check the cable connection or try with another video cable. • The panel backlight may be unstable. Contact the BenQ authorized service partner for replacement. Audio The image is displayed but no sound is heard. Possible causes Possible solutions Your graphic card driver is not installed or updated. Update the driver through Windows Update (for Windows Operating Systems) or the graphic card's manufacturer. The audio cable is loose. Power off the display and re-connect the audio cable. Power on the display again. Not external speakers are Connect external speakers to the display and adjust the connected. volume appropriately. The audio output device is not Make sure the setting in Speaker on your display is the consistent with the display setting. same with the audio output device. Either the display's or PC's Disable mute by pressing the MUTE button on the remote Speaker has been muted. control. The main board could be Contact the BenQ authorized service partner for damaged. replacement. (If the signal source is HDMI/DP) The Speakers in your OS is not Set DisplayPort or HDMI as the default speaker in your set properly. operating system and launch the media player again. Your display's audio input is not Set the Audio Source of your display to DisplayPort or set to DisplayPort or HDMI. HDMI. Remote control The remote control does not work. Possible causes Possible solutions The remote control does not work. Refer to Notes on using the remote control on page 8. The battery drained out. Replace with a new battery. The remote control is damaged. Try with a new remote control. Check if the LED indicator of the IR receiver lights red or The IR receiver could be damaged. does not light up. If so, contact the BenQ authorized service partner for replacement. It is out of the IR remote control Check the specifications and adjust the distance between range. the remote control and the display. 68 Troubleshooting