BenQ RM8602K Installation Handbook - Page 59

Digital Signage Bar-Type Series The bar type display panel is a long structured design panel. Designed with a slim form factor, the display panel can be used in small or large spaces to display everyday information. Installation notice • When the display is connected to the PCs or laptop, it is at its native resolution. Model Native Resolution (pixels) BH2401/BH2401T BH3501/BH3501T BH280/BH281/BH2801/BH2801N BH380 BH3801/BH3801N/BH3801D 1920 x 190 1920 x 130 1920 x 360 1920 x 545 1920 x 600 • Set the display to the projector mode. The picture will be displayed with full screen. • If the aspect ratio of the picture is the same as that of the display, the picture can be fully shown without distortion. Position Description Top Bottom Middle Zoom Out Zoom In The window is positioned to the top 1/3 of the screen. The window is positioned to the bottom 1/3 of the screen. The window is positioned to the middle 1/3 of the screen. The full screen is compressed into the window. • When the window is positioned to the top 1/3 of the screen, the input image zooms in 3%. • When the image is on the top and does not fill the screen, you can choose this position to present the best effect. Adjusting the OSD setting: For BH280/BH281/BH380 The resolution can be adjusted to 1920x1080. You can make the following display effects by adjusting the OSD setting. • If the input source is not1920x1080, only Zoom Out can be selected. • Frequency : Frequency narrows or widens the screen. Digital Signage Bar-Type Series 59