BenQ RM8602K Installation Handbook - Page 53
Drawing of Ceiling Mount, wiped with a dry cloth when the power is off. However
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
6. When turning off the display by disconnecting the power cable or DC power cord, wait for 6 seconds before reconnecting the power cable or DC power cord for normal operation.To protect your display from possible damage, do not put excessive pressure on the display. 7. Don't block the ventilation holes on the power box. It is prohibited to turn the ventilation hole of Power Box upside down. It is prohibited to place tilt. 8. Ensure the use of an approved power cord provided by BenQ at all times. If your power cord is missing, please contact your local service center. 9. Provide an earthing connection before the mains plug is connected to the mains. And, when disconnecting the earthing connection, be sure to disconnect after pulling out the mains plug from the mains. 10. Unplug the display if you are not going to use it for an extensive period of time. 11. Unplug the display if you need to clean it with a slightly damp cloth. The screen may be wiped with a dry cloth when the power is off. However, never use organic solvent, such as, alcohol, or ammonia-based liquids to clean your display. 12. If a foreign substance or water gets in your display, turn the power off immediately and disconnect the power cord. Then remove the foreign substance or water. 13. Don't store or use the display in locations exposed to heat, direct sunlight, or extreme cold. 14. > 4.5m height is recommended, otherwise will be crowded. 15. Drawing of Ceiling Mount Mounting installation 53