BenQ RM8602K Installation Handbook - Page 34
Setting the ID number of each display: PL460/PH460/PL550/PH550, Setting, Set Monitor ID
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
Setting the ID number of each display: PL460/PH460/PL550/PH550 Once you have installed the video wall, you need to set an ID number for each display to identify one among the multiple displays easily. This is helpful for video wall management, such as power management, OSD control, or color management. It is also helpful if additional adjustment is required for a specific display. To set the ID number, go to Setting > Set Monitor ID on each display for configuration. Pay attention not to set the same ID number for different displays, as the commands for video wall management would not be received correctly. Set the ID number starting from 1 to 98, depending on the number of displays daisy chained. There is no specific direction while going through all displays setting up the ID numbers. Following are some examples for your reference. 1 2 1 3 4 2 3 1 2 3 4 4 1 2 3 4 5 6 7 8 9 To set the ID number of each display for PL490/PL552/PL553/PH5501/PH5502, adjust the ID number for controlling the display via the RS232C connection. Each display must have a unique ID number when multiple sets of this display are connected. Monitor ID number range is between 1 to 225. The default setting is 1. All models of MDA only support from 1-98. 34 Video wall installation guide