BenQ RM8602K Installation Handbook - Page 27
Making a daisy chain, display: PL460/PH460/PL550/PH550
View all BenQ RM8602K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
Making a daisy chain Once you have installed the video wall, you are ready to connect all displays serially as a daisy chain for playback or centralized management. Follow the steps below to form a daisy chain, and refer to the mentioned sections for more information. In this chapter, illustrations of 4 daisy chained displays are for your reference only. You can connect more displays if needed, as long as it is within the limit of each daisy chain to ensure picture quality. See Number of daisy chained displays on page 30 for more information. 1. Install the video wall. Follow the instructions in Video wall installation guide on page 21. 2. Connect the video source (e.g. computer) and loop all displays using the required cables. See Cable connections on page 28 and Cable extension guide on page 10 for more information. 3. Set the horizontal and vertical position of the display wall matrix. This helps your computer identify how many displays are connected and how to display the image. See Setting the display position on page 31 for more information. Y 4. Set the ID number of each display for video wall management. See Setting the ID number of each display: PL460/PH460/PL550/PH550 on page 34 for 1 more information. 3 X 2 4 Video wall installation guide 27