Brother International BAS-705 Instruction Manual - English - Page 20

3. PANEL OPERATION ADJUSTMENT mode ɾ Adjustment of the belt loop feeder and of the X-Y feed for the machine head are carried out in this mode. ɾ If the MODE switch w is pressed in ADJUSTMENT mode, the mode will switch to SEWING mode. 3-2-5. Loop feeding ɾ Continuous operations are carried out one step at a time. ɾ This is useful to use for checking adjustment and operation. w Ϟʔυ MODE #"4 WARNING POWER Ϧηοτ RESET બ୒ SELECT औΓফ͠ CANCEL ֬ ఆ ENTER y r e t AUTO MODE ˗ 2nd bobbin counter Speed Loop length ˛ 1. Press the MODE switch w to select AUTO mode. 2. While pressing the SELECT switch e, press the MODE switch w. * This will change the mode to ADJUSTMENT ADJUSTMENT(/) ˗ Loop/feed X-Y/program X-Y/test feed mode. 3. Use the ˛ and˝
SELECT switches e to move the pointer "˗" so that "Loop/feed" is selected, and then press the ENTER switch t. LOOP/FEED/(ADJ) ˛SW Forward step ˝SW Backward step 4. Press the
˛ or ˝
SELECT switch e. * If the ˛ SELECT switch e is pressed, the machine will operate step by step in the forward direction. * If the˝SELECT switch e is pressed, the machine will operate step by step in the backward direction. * Press the CANCEL switch r to resume normal operation. NOTE:ɾDuring step operation, one of the steps is taken up with determining the home position for the upper shaft and lower shaft. ɾNote that actual sewing is also included in step operation. (Warning beeps will sound when sewing starts.) * Press the CANCEL switch r. ɾ Thread the upper thread properly. ɾ Press the CANCEL switch r. The mode will then switch to ADJUSTMENT mode. ʕ 17 ʕ B A S -705