Brother International BAS-705 Instruction Manual - English - Page 71
DIP SWITCH, 8-1.Panel DIP switch functions, To display Japanese
View all Brother International BAS-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
8. DIP SWITCH 8. DIP SWITCH NOTE ɾ When changing a DIP switch, the power must be off. ɾ The power must be off when changing the position of a DIP switch. After the position of a DIP switch has been changed, the altered function will not take effect until the power is turned off and then turned back on again. 8-1.Panel DIP switch functions No 1 No 2 ON OFF SW1-1 To activate the thread breakage detector To deactivate the thread breakage detector SW1-2 To V-cut a belt loop To flat cut a belt loop SW1-3 SW1-4 SW1-5 To display Japanese The fork is retracted when the FOOT switch or BOBBIN switch is pressed. To activate loop set sensor To display English The fork is not retracted when the FOOT switch or BOBBIN switch is pressed. To deactivate loop set sensor SW1-6 SW1-7 SW1-8 Loops are fed at low speed. To activate folding switch After automatic sewing, the presser foot remains down. Pressing the RESET switch will raise the presser foot. Loops are fed at normal speed. To deactivate folding switch After automatic sewing, the presser foot rises. ʕ 68 ʕ B A S -705