Brother International BAS-705 Instruction Manual - English - Page 37
Replacing the bobbin, 7-11. Altering the production counter value
View all Brother International BAS-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4. SEWING 4-7-10. Replacing the bobbin 1. Press the BOBBIN switch while the machine is in sewing standby mode. The presser foot will be lowered and the X-Y feed mechanism will be retracted. 2. Open the module and replace the bobbin. 3. Close the module, and then press the RESET switch. The X-Y feed mechanism will move back to the sewing start position and the presser foot will be raised. Refer to "4-4. Bobbin case installation and threading" on page 26. 4-7-11. Altering the production counter value If the (˛) SELECT switch is pressed while the machine is in sewing standby mode, the production counter value will increase by 1. If the ( ˝) SELECT switch is pressed, the production counter value will decrease by 1. ʕ 34 ʕ B A S -705
4-7-10. Replacing the bobbin
1. Press the BOBBIN switch while the machine is in sewing standby mode. The presser foot will be
lowered and the X-Y feed mechanism will be retracted.
2. Open the module and replace the bobbin.
3. Close the module, and then press the RESET switch. The X-Y feed mechanism will move back to the
sewing start position and the presser foot will be raised.
Refer to "4-4. Bobbin case installation and threading" on page 26.
4-7-11. Altering the production counter value
If the (
▲
) SELECT switch is pressed while the machine is in sewing standby mode, the production
counter value will increase by 1. If the (
▼
) SELECT switch is pressed, the production counter value will
decrease by 1.
4. SEWING
―
34
―
BAS-705