Brother International BAS-705 Instruction Manual - English - Page 44
Second bar tacking, to the left or right to adjust so
View all Brother International BAS-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
5-7-2. Second bar tacking q w e r 5. STANDARD ADJUSTMENT (MACHINE HEAD) 1. Close the air cock q. 2. Push the drain cock button w to release the air. 3. Remove the six screws r of the BM-front cover e, and then remove the BM-front cover e. t y u 4. Remove the thread trimmer spring t from the spring hook y. 5. Loosen the screw of the thread trimmer lever u. i o !0 B A 6. While the thread trimmer lever roller i is touching the level surface of the thread trimmer cam o, move the movable knife !0 to the left or right to adjust so that the V section " of the movable knife !0 is aligned with the index mark # on the needle plate. ʕ41ʕ B A S -705
5. STANDARD ADJUSTMENT (MACHINE HEAD)
5-7-2. Second bar tacking
3.
Remove the six screws
r
of the BM-front cover
e
,
and then remove the BM-front cover
e
.
4.
Remove the thread trimmer spring
t
from the spring
hook
y
.
5.
Loosen the screw of the thread trimmer lever
u
.
1.
Close the air cock
q
.
2.
Push the drain cock button
w
to release the air.
6.
While the thread trimmer lever roller
i
is touching
the level surface of the thread trimmer cam
o
, move
the movable knife
!0
to the left or right to adjust so
that the V section
A
of the movable knife
!
0
is aligned
with the index mark
B
on the needle plate.
―
41
―
BAS-705
e
r
t
y
u
q
w
i
o
!
0
B
A