Brother International BAS-705 Instruction Manual - English - Page 60
When replacing the fork bracket separate type], onto the fork bracket
View all Brother International BAS-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
6. STANDARD ADJUSTMENT (MECHANISMS) [When replacing the fork bracket (separate type)] e q 1. Loosen the two set screws w of the fork bracket shaft q, and then remove the fork bracket e from the fork bracket shaft q. w r t r 2. Insert the new fork bracket r onto the fork bracket shaft q until the end of the fork bracket r is aligned with the end of the loop presser t, and then tighten the two set screws w. q w u y ˙ When replacing fork shaft L and fork shaft S Loosen the set screw y and then replace for shaft L and fork shaft S u. ʕ57ʕ B A S -705
6. STANDARD ADJUSTMENT (MECHANISMS)
―
57
―
BAS-705
w
e
q
t
r
r
q
w
u
y
[When replacing the fork bracket (separate type)]
1.
Loosen the two set screws
w
of the fork bracket
shaft
q
, and then remove the fork bracket
e
from
the fork bracket shaft
q
.
2.
Insert the new fork bracket
r
onto the fork bracket
shaft
q
until the end of the fork bracket
r
is
aligned with the end of the loop presser
t
, and then
tighten the two set screws
w
.
■
When replacing fork shaft L and fork shaft S
Loosen the set screw
y
and then replace for shaft
L and fork shaft S
u
.