Brother International BAS-705 Instruction Manual - English - Page 77
TROUBLESHOOTING, 10-1. Machine Head
View all Brother International BAS-705 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
10. TROUBLESHOOTING 10. TROUBLESHOOTING 10-1. Machine Head Problem Cause Check Remedy Page Presser does not rise. Thread wiper does not operate correctly. Lower thread winds to one side. Lower thread winding amount is incorrect. Threads comes unthreaded. Lower thread breaks. Presser lifter air tube is bent or damaged. Presser lifter air tube is bent or damaged. Presser is contacting thread wiper. Presser lifter air tube Presser lifter air tube Thread wiper standby position Straighten the bend in the tube or replace the tube. 7 Straighten the bend in the tube or replace the tube. 7 Adjust the position of the thread wiper. 45 The thread wiper is obstructing the needle. Thread wiper position is incorrect. Bobbin winder thread tension stud height is incorrect. Clearance between thread wiper and needle tip Thread wiper position Bobbin winder thread tension stud height Adjust the height of the thread wiper. 45 Adjust the operating distance of the thread 45 wiper. Adjust the height of the thread tension stud. 26 Bobbin presser position is incorrect. Thread winding amount Adjust the position of the bobbin presser. 26 Stitches being skipped at the sewing start. Uneven upper thread length. Needle is too thick for the thread. Incorrect height or tension of thread take-up spring. Refer to "Skipped stitches occur". Upper thread length Thread and needle Tension and height of thread take-up spring Lower thread tension is too strong. Damaged or burred needle hole plate, bobbin case corner, shuttle race thread guide or shuttle race. Tension of bobbin presser spring in bobbin case is too strong. Lower thread winding method is incorrect. Lower thread tension Damage Bending amount of bobbin presser spring Lower thread tension Refer to "Skipped stitches occur". Adjust the sub-tension. 28 Select a needle that matches the thread. Check that the thread path. gives the 28 correct amount of resistance to the thread. Increase the tension or lower the height of the 29 thread take-up pring. Adjust the lower thread tension. 28 File smooth or replace the affected part. Reduce the tension of the bobbin presser spring. 28 Adjust the lower thread tension. 26.28 ʕ 74 ʕ B A S -705