Brother International BAS-705 Instruction Manual - English - Page 36

If the EMERGENCY STOP switch is pressed E-100, 7-8. If the upper thread breakage codes E-181

Get Brother International BAS-705 PDF manuals and user guides View all Brother International BAS-705 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 36 highlights

4. SEWING 4-7-2. If the machine stops during sewing Press the EMERGENCY STOP switch. The error code (E-100) will appear on the screen and the ma chine will stop at the step where the switch was pressed. 4-7-3. If the EMERGENCY STOP switch is pressed (E-100) During AUTO mode ɾ Before the machine head starts 1. Unlock the EMERGENCY STOP switch. 2. Press the RESET switch. The error will be cleared and the machine will switch to sewing standby mode. During HEAD mode ɾ Before the machine head starts 1. Unlock the EMERGENCY STOP switch. 2. Press the RESET switch. The error will be cleared and the machine will switch to sewing standby mode. 4-7-4. Resetting the belt loops If the LOOP switch is pressed when DIP switch No. 2-7 is set to OFF, the machine will be reset. If the LOOP switch is pressed once more, a new belt loop will be set. * If the LOOP switch is pressed when DIP switch No. 2-7 is set to ON, the machine will be reset, and then a new belt loop will be set straight away. 4-7-5. Removing an overlapping loop while in the sewing standby condition. ɾPress the CANNCEL switch.Presser block B will be raised and it will then be possible to remove the loop. 4-7-6. Stopping sewing when the presser foot is lowered 1. If DIP switch No. 1-8 on the panel is set to ON, the presser foot will be lowered and stay in this conditionwhenautomatic sewing is completed. 2. If the RESET switch is pressed, the presser foot will be raised. 4-7-7. Raising and lowering the presser foot 1. If the FOOT switch is pressed while the machine is in sewing standby mode, the presser foot will be lowered. 2. If the RESET switch is pressed, the presser foot will be raised. Refer to "4-6-1. Raising and lowering the presser foot" on page 29. 4-7-8. If the upper thread breakage codes (E-181, E-182) are displayed Press the RESET switch. The machine will switch to sewing standby mode. Refer to "4-6-2 If the upper thread breakage codes (E-181, E-182) are displayed" on page 30. 4-7-9. If an error code is displayed during sewing Refer to "Error Codes" on page 70. ʕ 33 ʕ B A S -705

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
4. SEWING
4-7-2. If the machine stops during sewing
Press the EMERGENCY STOP switch. The error code (E-100) will appear on the screen and the ma
chine will stop at the step where the switch was pressed.
4-7-6. Stopping sewing when the presser foot is lowered
1. If DIP switch No. 1-8 on the panel is set to ON, the presser foot will be lowered and stay in this
conditionwhenautomatic sewing is completed.
2. If the RESET switch is pressed, the presser foot will be raised.
4-7-4. Resetting the belt loops
If the LOOP switch is pressed when DIP switch No. 2-7 is set to OFF, the machine will be reset. If the
LOOP switch is pressed once more, a new belt loop will be set.
*
If the LOOP switch is pressed when DIP switch No. 2-7 is set to ON, the machine will be reset, and then
a new belt loop will be set straight away.
4-7-5. Removing an overlapping loop while in the sewing standby condition.
・
Press the CANNCEL switch.Presser block B will be raised and it will then be possible to remove the
loop.
―
33
―
BAS-705
1.
Unlock the EMERGENCY STOP switch.
During AUTO mode
1.
Unlock the EMERGENCY STOP switch.
2.
Press the RESET switch. The error will be cleared and the machine will switch to sewing standby
mode.
・
Before the machine head starts
4-7-3. If the EMERGENCY STOP switch is pressed (E-100)
2.
Press the RESET switch. The error will be cleared and the machine will switch to sewing standby
mode.
・
Before the machine head starts
During HEAD mode
4-7-7. Raising and lowering the presser foot
1. If the FOOT switch is pressed while the machine is in sewing standby mode, the presser foot will be
lowered.
2. If the RESET switch is pressed, the presser foot will be raised.
Refer to "4-6-1. Raising and lowering the presser foot" on page 29.
4-7-8. If the upper thread breakage codes (E-181, E-182) are displayed
Press the RESET switch. The machine will switch to sewing standby mode.
Refer to "4-6-2 If the upper thread breakage codes (E-181, E-182) are displayed" on page 30.
4-7-9. If an error code is displayed during sewing
Refer to "Error Codes" on page 70.