Brother International BE-1201B-AC Instruction Manual - English - Page 131
Grid, Hoop, Hoop position fine adjustment, Hoop] of Settings menu.
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
Grid Displays 1 × 1 cm square grids on the background. 1. Select [Grid] from View menu and put the check mark. Chapter 6 Embroidering Before selecting W1071Q After selecting W1072Q Hoop Displays the outline of embroidery hoop. Hoop] of Settings menu. The type of embroidery hoop can be changed in [Load ! Embroidering is allowed within the green guide in the hoop. 1. Select [Hoop] from the View menu and put a check mark. If the hoop is not displayed, carry out the step to read the hoop. For details, refer to [Load Hoop] (→ page 6-46). Before selecting W1073Q After selecting W1074Q Hoop position fine adjustment Adjusts the view position of embroidery hoop. ! The position can be adjusted in the range of ±20 mm in both the X and Y directions. 1. Select [Hoop position] from the View menu. The hoop view position is stored in the hoop data. If you reinstall the program, the hoop view position is initialized because it is overwritten. BE-0901E-AC-PC• BE-1201B-AC-PC 6-11