Brother International BE-1201B-AC Instruction Manual - English - Page 151
Thread Trimming, The following items can be set, Select [Thread Trimming] from Settings menu.
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Chapter 6 Embroidering The image is displayed upside down. The speed is automatically adjusted to 800 rpm or less. W1120Q When "Semi-wide cap (ALL)" is selected. Thread Trimming ! The following items can be set: Enable inching Sets inching motion for thread trimming. Hoop movement after thread trimming Sets the needle penetration length for trimming. The length can be set in inches. To set the length in inch unit, select [Inch] from the [Configuration] of Tool menu. The available values are as follows: For mm 0 - 100 mm (The standard value is 15 mm.) For inch 0 - 3.9 inch (The standard value is 0.6 inch.) Thread length (1-10) for all machines Sets the overall thread amount through the needle. Value of 1 to 10 can be set. The smaller the value is, the shorter the length is. Thread length after thread trimming Sets the overall thread amount through the needle. Value of 1 to 10 can be set. The smaller the value is, the shorter the length is. 1. Select [Thread Trimming] from Settings menu. 2. Set inching, thread length, etc. 3. Click [OK]. W1121Q BE-0901E-AC-PC• BE-1201B-AC-PC 6-31