Brother International BE-1201B-AC Instruction Manual - English - Page 162
Default Settings, Resets changes of the machine setting to the default.
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Chapter 6 Embroidering Default Settings Resets changes of the machine setting to the default. ! Items for setting and initialization are as follows: Speed Range Automatically selects the value suitable for the hoop type. Hoop Feed Position Returns to the machine home position. Embroidering Area Sets the size each for the selected hoop. Thread Trimming Inching motion Thread removal feed length Thread remaining amount Yes 15 mm (0.6 inch) 4 Thread Breakage Sensor All sensors are on. Sensitivity 10 Automatic Step Back 0 Thread Breakage Sensor Sensitivity Not affected by the thread breakage sensor sensitivity Automatic Feed Hoop No Return to the start point Yes Mending Automatically rest breakage error No Adjustment 0.0 mm for X direction 0.0 mm for Y direction Main shaft speed up setting Activating speed up of driving shaft No Hoop feed during temporary No stop Reducing speed in a small No pitch Thin / Thick material Thin Feed speed 1 Jog moving power up No Area Trace "4 corner" is selected. 6-42 BE-0901E-AC-PC• BE-1201B-AC-PC