Brother International BE-1201B-AC Instruction Manual - English - Page 220
Adjusting Needle Bar Height
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
Chapter 10 Adjustment CAUTION Turn off the power switch and pull out the plug before starting adjustment. Failure to do so may start the machine unintentionally through an accidental activation of the START switch, resulting in bodily injuries. •Adjustment If adjustment should be made while the power switch is turned on, pay special attention to your safety. Maintenance and inspection of the machine should be conducted only by trained engineers. 1. Adjusting Needle Bar Height [6] [5] [1] 180° W1619 [6] [5] [7] W1222 [7] [3] [4] 10.8mm Oil cap [2] W1621 W1620 Tighten the bolt [7] so that the clearance can be even. [8] Do not hit this section. W1623 [8] 10-2 BE-0901E-AC-PC• BE-1201B-AC-PC
10-2
BE-0901E-AC-PC° BE-1201B-AC-PC
Chapter 10 Adjustment
CAUTION
If adjustment should be made while the power
switch is turned on, pay special attention to your
safety.
Turn off the power switch and pull out the plug
before starting adjustment. Failure to do so
may start the machine unintentionally through
an accidental activation of the START switch,
resulting in bodily injuries.
•
Adjustment
Maintenance and inspection of the machine
should be conducted only by trained engineers.
1. Adjusting Needle Bar Height
W1619
W1621
W1620
W1222
W1623
[7]
[6]
[4]
[1]
[6]
[7]
[5]
[3]
[2]
10.8mm
Do not hit
this section.
[8]
[8]
Tighten the
bolt [7] so that
the clearance
can be even.
[5]
180±
Oil cap