Brother International BE-1201B-AC Instruction Manual - English - Page 153
Thread Breakage Sensor, Select [Thread Breakage Sensor] from Setting menu.
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Chapter 6 Embroidering Thread Breakage Sensor The sensor for thread breakage can be turned ON/OFF or the sensor sensitivity for each needle bar can be set. ! The sensitivity can be set within the range of 1 - 100. The smaller the value is, the higher the sensitivity is. 1. Select [Thread Breakage Sensor] from Setting menu. 2. Click the head you want to disable the sensor and remove the check mark ( ). 3. Adjust the sensor sensitivity. W1642 4. Click [OK]. The sensor sensitivity for each needle bar is adjusted individually. All sensor sensitivities for all needle bars are adjusted simultaneously. W1643 BE-0901E-AC-PC• BE-1201B-AC-PC 6-33
BE-0901E-AC-PC° BE-1201B-AC-PC
6-33
Chapter 6
Embroidering
Thread Breakage Sensor
The sensor for thread breakage can be turned ON/OFF or the sensor sensitivity for each needle
bar can be set.
!
The sensitivity can be set within the range of 1 - 100.
The smaller the value is, the higher the
sensitivity is.
1.
Select [Thread Breakage Sensor] from Setting menu.
2.
Click the head you want to disable the sensor and remove the check mark (
).
W1642
3.
Adjust the sensor sensitivity.
W1643
4.
Click [OK].
The sensor sensitivity for each
needle bar is adjusted individually.
All sensor sensitivities for all needle
bars are adjusted simultaneously.