Brother International BE-1201B-AC Instruction Manual - English - Page 148
Hoop Feed Position, Select [Hoop Feed Position] from Settings menu.
View all Brother International BE-1201B-AC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 148 highlights
Chapter 6 Embroidering Hoop Feed Position Set the basic position of the hoop (hoop feed position) for cancellation of embroidering. ! The hoop feed position can be set only in the embroidering area surrounded by a red frame. ! The hoop feed position can not be set in the upper side of the frame when [Tubular] is selected in [Embroidery hoop] and the frame is displayed on the screen. 1. Select [Hoop Feed Position] from Settings menu. 2. Click the point to feed the hoop. Hood feed position W1114Q 3. The gray cross appears and shows the hoop feed position. W1115Q 6-28 BE-0901E-AC-PC• BE-1201B-AC-PC
6-28
BE-0901E-AC-PC° BE-1201B-AC-PC
Chapter 6
Embroidering
Hoop Feed Position
Set the basic position of the hoop (hoop feed position) for cancellation of embroidering.
!
The hoop feed position can be set only in the embroidering area surrounded by a red frame.
!
The hoop feed position can not be set in the upper side of the frame when [Tubular] is selected in
[Embroidery hoop] and the frame is displayed on the screen.
1.
Select [Hoop Feed Position] from Settings menu.
2.
Click the point to feed the hoop.
W1114Q
3.
The gray cross appears and shows the hoop feed position.
W1115Q
Hood feed position