Brother International DCP 7020 Software Users Manual - English - Page 29
Scanning a document into the PC (DCP-7020, MFC-7420 and MFC-7820N Only)
UPC - 012502612834
View all Brother International DCP 7020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
How to scan using Windows® Scanning a document into the PC (DCP-7020, MFC-7420 and MFC-7820N Only) There are two ways in which you can scan a whole page. You can either use the ADF (automatic document feeder) or the Flatbed scanner glass. 2 If you would like to scan and then crop a portion of the page after pre-scanning the document, you will need to use the scanner glass (Flatbed). (See Pre-Scanning to crop a portion you want to scan on page 2-9.) Scanning a document using the ADF 1 Load your document. 2 Select the Document Feeder from the Paper source drop-down list box (A). A B C D 3 Select the picture type (B). 4 Select the Paper size from the drop-down list box (D). 5 If you require advanced settings, click on the tab Adjust the quality of the scanned picture (C). You can select Brightness, Contrast, Resolution and Picture Type from the Advanced Properties. Click the OK button after you choose your settings. Note ■ You can select a resolution of up to 1200 dpi. ■ For resolutions greater than 1200 dpi, use the Brother Scanner Utility. (See Brother Scanner Utility (not available for MFC-7220 and MFC-7225N) on page 2-6.) 6 To start scanning your document, click the Scan button in the Scan dialog box. 2 - 4