Brother International IntelliFax-1800C Users Manual - English - Page 70

Fax Resolution When you have a document in the ADF, you can use the FAX Resolution key to temporarily change the setting. Press FAX Resolution repeatedly until the LCD shows the setting you want. -OR- You can change the default setting. 1 Press Menu/Set, 2, 2, 2. 2.FAX RESOLUTION 2 Press or to select the resolution you want, and then press Menu/Set. 3 Press Stop/Exit. STANDARD-Suitable for most typed documents. FINE-Good for small print; transmits a little slower than Standard resolution. S. FINE-Good for small print or artwork; transmits slower than Fine resolution (black and white only). PHOTO-Use when original has varying shades of gray; this is the slowest transmission time (black and white only). Manual Transmission Manual transmission lets you hear the dial tone, ringing and fax receiving tones while sending a fax. 1 Place the original face down in the ADF. 2 Pick up the handset and listen for a dial tone-OR-press Hook/Hold and listen for a dial tone. 3 Enter the fax number you want to call. You can enter the digits using the dial pad, or you can enter a One Touch or Speed Dial number or you can call using Search. (See One Touch Dialing, page 8-5.) 4 When you hear the fax tone, press Black Fax Start. 5 Replace the handset. Automatic Transmission This is the easiest way to send a fax. IMPORTANT: Do not pick up the handset, or press Hook/Hold to listen for a dial tone. 1 Place the original face down in the ADF. 2 Enter the fax number using the dial pad, One Touch, Speed Dial or Search. (See Speed Dialing, page 8-5.) 3 Press Black Fax Start. 7-3 SETUP SEND