Brother International IntelliFax-1800C Users Manual - English - Page 96

Remote Commands Follow the commands below to access features remotely. When you call the fax machine and enter your Remote Retrieval Access Code (1 5 9 ), the system will signal you with two short beeps to enter a remote command. Remote Commands 95 Change Fax Forwarding /Paging setting 1 OFF 2 Fax Forwarding 3 Paging 4 FAX FWD No. 6 Fax Storage ON 7 Fax Storage OFF 96 Retrieve a fax 2 Retrieve all faxes 3 Erase fax from the memory 97 Check the Receiving Status 1 FAX 98 Change Receive Mode 1 TAD: ANSWER MACH. 2 FAX/TEL 3 FAX ONLY 90 Exit Operation Details If you hear one long beep, the change is accepted. If you hear three short beeps, you cannot change it because the conditions have not been met (Example: registering paging number). You can register your fax forwarding number by using 4. FAX FWD NO. (see page 10-5). Once you have registered the number, the fax machine will change automatically to FAX FWD:ON mode. You can turn FAX STORAGE to ON or OFF. Enter the number of a remote fax machine to receive stored fax message(s). (See page 10-5.) If you hear one long beep, you can erase fax message(s) from the memory. You can check whether your fax machine has received any faxes. If yes, you will hear one long beep. If no, you will hear three short beeps. If you hear one long beep, you can change the Receive Mode. If you hear three short beeps, you cannot change it. After a long beep, you can exit remote retrieval. 10 - 4 R E M O T E F A X O P T I O N S ( N O T A V A I L A B L E F O R C O L O R F A X E S )