Brother International MFC-790CW Quick Setup Guide - English - Page 13

Set up the cordless handset (MFC-990CW only) 16 Install the battery a Insert the connector a of the battery b in the direction shown below. 2 17 Charge the battery a Place the cordless handset on the cradle with the dial pad facing forward. 1 b Place the battery in the position shown. Note If your battery charge level is getting low, you should charge the battery. You can see the battery charge level indicator at the bottom right of the LCD. c Install the battery cover by sliding it onto the back of the handset. Note Be careful that you do not catch the battery connector cord. d Charge the battery by leaving the cordless handset in the cradle for at least 12 hours before you use it. You can continue to set up the handset during this time. 18 Set your country on the cordless handset The first time you install the battery, you must set your country so that the cordless handset works correctly on local telecommunication lines. a The LCD shows: Set Country Press OK Key b Press Menu/OK. c Press a or b to choose your country. Press Menu/OK. d Press 1 to confirm. Note The LCD of the handset will display "Searching for Base Unit" or "Base Unit not detected" until the initial setup of the machine is complete. 13