Brother International MFC-790CW Quick Setup Guide - English - Page 24

Wired Network Windows® c Carefully route the network cable through the trench and out the back of the machine. Then, connect the cable to your network. 25 Connect the power cord a Connect the power cord. Note If both USB and LAN cables are being used, guide both cables through the trench with one on top of the other. Important Make sure that the cable does not restrict the cover from closing, or an error may occur. d Lift the scanner cover to release the lock a. Gently push the scanner cover support down b and close the scanner cover c. 1 2 3 Important If you have previously set up your machine for a wireless network and then want to set it up on a wired network, you should check that the machine's Network I/F is set to Wired LAN. The wireless network interface will become inactive with this setting. On your machine, press MENU. Press a or b to display Network and press Network. Press Network I/F. Press Wired LAN. Press Stop/Exit. 24