Brother International MFC-790CW Quick Setup Guide - English - Page 2
Connect the handset (MFC-790CW only), 3 Load plain Letter/A4 paper, USB cable, Network cable
UPC - 012502620501
View all Brother International MFC-790CW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
Note • The components included in the box may differ depending on your country. • Save all packing materials and the box in case for any reason you must ship your machine. • You need to purchase the correct interface cable for the interface you want to use (for USB or network connection). USB cable Please make sure you use a USB 2.0 cable (Type A/B) that is no more than 6 feet (2 meters) long. Network cable Use a straight-through Category5 (or greater) twisted-pair cable for 10BASE-T or 100BASE-TX Fast Ethernet Network. Note MFC-990CW only Make sure you remove the battery, battery cover and cordless handset from the carton and from their individual packaging. Save them for when you Install the battery on page 13. 3 Load plain Letter/A4 paper a Pull the paper tray a completely out of the machine. 1 b Open the paper tray cover a. 1 2 Connect the handset (MFC-790CW only) a Connect the curled handset cord to the handset. c With both hands, gently press and slide the paper side guides a and then the paper length guide b to fit the paper size. Make sure that the triangular marks c on the paper side guides a and paper length guide b line up with the mark for the paper size you are using. 1 3 2 3 2