Brother International MFC-J270w Network Users Manual - English - Page 108
Using RARP to con the IP address, For AT&T UNIX
View all Brother International MFC-J270w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 108 highlights
Appendix A Using RARP to configure the IP address A The Brother print server's IP address can be configured using the Reverse ARP (RARP) facility on your host computer. This is done by editing the /etc/ethers file (if this file does not exist, you can create it) with an entry similar to the following: 00:80:77:31:01:07 BRN008077310107 (or BRW008077310107 for a wireless network) Where the first entry is the MAC Address (Ethernet Address) of the print server and the second entry is the name of the print server (the name must be the same as the one you put in the /etc/hosts file). If the RARP daemon is not already running, start it (depending on the system the command can be rarpd, rarpd -a, in.rarpd -a or something else; type man rarpd or refer to your system documentation for additional information). To verify that the RARP daemon is running on a Berkeley UNIX® based system, type the following command: ps -ax | grep -v grep | grep rarpd For AT&T UNIX®-based systems, type: ps -ef | grep -v grep | grep rarpd The Brother print server will get the IP address from the RARP daemon when the machine is powered on. A 101