Brother International MFC-J270w Network Users Manual - English - Page 70
Troubleshooting, Quick Setup Guide, entered the WEP key correctly. The WEP key is case sensitive.
View all Brother International MFC-J270w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
Wireless configuration using the Brother installer application o A wireless LAN report will automatically be printed. Choose the status as it is shown for the Connection on the wireless LAN report. Click Next. If your status is "Connection:OK", go to step q. If your status is "Connection:Failed", go to step p. 4 Note If you are using WEP and your status is "Connection:OK" but your machine is not found, make sure you entered the WEP key correctly. The WEP key is case sensitive. p Click Finish. Wireless setup failed as it was unable to associate with a wireless network. Check the error code on the printed wireless LAN report and refer to Troubleshooting in the Quick Setup Guide. Then try starting from step c-3 again. 63
Wireless configuration using the Brother installer application
63
4
o
A wireless LAN report will automatically be printed. Choose the status as it is shown for the
Connection
on the wireless LAN report.
Click
Next
. If your status is
"Connection:OK"
, go to step
q
.
If your status is
"Connection:Failed"
, go to step
p
.
Note
If you are using WEP and your status is
"Connection:OK"
but your machine is not found, make sure you
entered the WEP key correctly. The WEP key is case sensitive.
p
Click
Finish
. Wireless setup failed as it was unable to associate with a wireless network. Check the error
code on the printed wireless LAN report and refer to
Troubleshooting
in the
Quick Setup Guide
. Then try
starting from step
c
-3 again.