Brother International MFC-J270w Network Users Manual - English - Page 58
Yes, my Access Point supports WPS or AOSS and I want to use them., Important Notice
View all Brother International MFC-J270w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Wireless configuration using the Brother installer application d Choose Yes, my Access Point supports WPS or AOSS and I want to use them. and click Next. 4 e Read the Important Notice. Check the box after you confirm the wireless setting is enabled, and then click Next. f Press Menu, a or b to choose Network and press OK. (For DCP-J715W, MFC-J615W and MFC-J630W) Press a or b to choose WLAN and then press OK. Press a or b to choose WPS/AOSS and press OK. Note If your wireless access point supports Wi-Fi Protected Setup (PIN Method) and you want to configure your machine using the PIN (Personal Identification Number) Method, see Using the PIN Method of Wi-Fi Protected Setup on page 34. g The machine searches for an access point that supports Wi-Fi Protected Setup or AOSS™ for 2 minutes. h Put your access point in the Wi-Fi Protected Setup mode or AOSS™ mode, depending on what is supported by your access point. Please refer to the instruction manual that came with your access point. 51