Brother International MFC-J270w Network Users Manual - English - Page 34

Configuring your machine for a wireless network, Using the Setup Wizard from the control panel

Get Brother International MFC-J270w PDF manuals and user guides View all Brother International MFC-J270w manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

Configuring your machine for a wireless network Configuring your machine for a wireless network 3 IMPORTANT • If you are going to connect your Brother machine to your network, we recommend that you contact your system administrator prior to installation. You must know your wireless network settings before you proceed with this installation. 3 • If you have previously configured the wireless settings of the machine, you must reset the network LAN settings before you can configure the wireless settings again. Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK. Press 1 or + to reset and then press 1 or + to accept the change. The machine will restart automatically. Using the Setup Wizard from the control panel 3 You can configure your print server by using the Setup Wizard function. This is located in the Network menu on the machine's control panel. See to the steps below for further information. Configuring your machine for an existing wireless network 3 a Before configuring your machine we recommend you write down the SSID and Password (Network Key) (if required) for your wireless network. You will need this information before you continue with the configuration. If your wireless access point/router is set to not broadcast the SSID Name, see Configuring your machine when the SSID is not broadcast on page 29. Item Network name: (SSID/ESSID) Password (Network Key) Record the current wireless network settings Note If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine supports the use of the first WEP key only. b Press Menu. c Press a or b to choose Network. Press OK. d For DCP-J715W, MFC-J615W and MFC-J630W Press a or b to choose WLAN. Press OK. e Press a or b to choose Setup Wizard. Press OK. 27

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
Configuring your machine for a wireless network
27
3
Configuring your machine for a wireless network
3
IMPORTANT
•
If you are going to connect your Brother machine to your network, we recommend that you contact your
system administrator prior to installation.
You must know your wireless network settings before you
proceed with this installation.
•
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again.
Press
Menu
,
a
or
b
to choose
Network
, press
OK
. Press
a
or
b
to choose
Network Reset
, press
OK
.
Press
1
or
+
to reset and then press
1
or
+
to accept the change. The machine will restart automatically.
Using the Setup Wizard from the control panel
3
You can configure your print server by using the
Setup Wizard
function. This is located in the
Network
menu on the machine’s control panel. See to the steps below for further information.
Configuring your machine for an existing wireless network
3
a
Before configuring your machine we recommend you write down the SSID and Password (Network Key)
(if required) for your wireless network. You will need this information before you continue with the
configuration. If your wireless access point/router is set to not broadcast the SSID Name, see
Configuring your machine when the SSID is not broadcast
on page 29.
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press
Menu
.
c
Press
a
or
b
to choose
Network
.
Press
OK
.
d
For DCP-J715W, MFC-J615W and MFC-J630W
Press
a
or
b
to choose
WLAN
.
Press
OK
.
e
Press
a
or
b
to choose
Setup Wizard
.
Press
OK
.
Item
Record the current wireless network settings
Network name: (SSID/ESSID)
Password (Network Key)