Brother International MFC-J270w Network Users Manual - English - Page 21
Using the control panel to con your machine for a network, STATIC, Boot Method, IP Address
View all Brother International MFC-J270w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Configuring your machine for a network with an Ethernet cable connection (DCP-J715W, MFC-J615W and MFC-J630W only) d Choose STATIC from Boot Method. Enter the IP Address, Subnet Mask and Gateway (if needed) of your print server. Windows® 2 Macintosh e Click OK. f With the correctly programmed IP address, you will see the Brother print server in the device list. Using the control panel to configure your machine for a network 2 You can configure your machine for a network using the control panel Network menu. (See Control panel setup on page 65.) Using other methods to configure your machine for a network 2 You can configure your machine for a network using other methods. (See Other ways to set the IP address (for advanced users and administrators) on page 100.) 14