Brother International MFC-J270w Network Users Manual - English - Page 84
Restoring the network settings to factory default
View all Brother International MFC-J270w manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Control panel setup Restoring the network settings to factory default 5 If you wish to reset the print server back to its default factory settings (resetting all information such as the password and IP address information), please follow these steps: Note This function restores all wired and wireless network settings to the factory default. a Press Menu. b Press a or b to choose Network. Press OK. 5 c Press a or b to choose Network Reset. Press OK. d Press 1 for Reset. e Press 1 for Reboot. Note For DCP models, press + for Network Reset and then press + for Reboot. f The machine will re-start. (For DCP-J715W, MFC-J615W and MFC-J630W) You can now reconnect the network cable and configure the network settings to work with your network. 77
Control panel setup
77
5
Restoring the network settings to factory default
5
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a
Press
Menu
.
b
Press
a
or
b
to choose
Network
.
Press
OK
.
c
Press
a
or
b
to choose
Network Reset
.
Press
OK
.
d
Press
1
for
Reset
.
e
Press
1
for Reboot.
Note
For DCP models, press
+
for
Network Reset
and then press
+
for Reboot.
f
The machine will re-start.
(For DCP-J715W, MFC-J615W and MFC-J630W) You can now reconnect the network cable and
configure the network settings to work with your network.