Brother International MFC-J6910dw Users Manual - English - Page 190
LCD screen, Setting the backlight brightness, Setting the Dim Timer for the backlight, Dial Prefix
UPC - 012502627272
View all Brother International MFC-J6910dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Chapter 1 LCD screen 1 Setting the backlight brightness 1 You can adjust the brightness of the LCD backlight. If you are having difficulty reading the LCD, try changing the brightness setting. a Press MENU. b Press a or b to display General Setup. c Press General Setup. d Press a or b to display LCD Settings. e Press LCD Settings. f Press Backlight. g Press Light, Med or Dark. h Press Stop/Exit. Setting the Dim Timer for the backlight 1 You can set how long the LCD backlight stays on after you go back to the Ready screen. a Press MENU. b Press a or b to display General Setup. c Press General Setup. d Press a or b to display LCD Settings. e Press LCD Settings. f Press Dim Timer. g Press 10 Secs, 20 Secs, 30 Secs or Off. h Press Stop/Exit. Dial Prefix 1 The Dial Prefix setting will automatically dial a predefined number before every fax number you dial. For example, if your telephone system requires you to dial 9 before dialing an outside number use this setting to automatically dial 9 for every fax you send. Setting up or changing the prefix number 1 a Press MENU. b Press a or b to display Initial Setup. c Press Initial Setup. d Press a or b to display Dial Prefix. e Press Dial Prefix. f Press On (or Off). g Press Dial Prefix. h Enter the prefix number (up to 5 digits) by pressing the buttons on the Touchscreen. i Press OK. Note • If your telephone system requires a timed break recall (hookflash), press ! to enter the break. • You cannot use ! with any other numbers or characters. • (Canada only) If the pulse dialing mode is on, # and l are not available to use. j Press Stop/Exit. 4