Brother International MFC-J6910dw Users Manual - English - Page 53
Paper settings, Paper Size and Type, Tray use in COPY mode
UPC - 012502627272
View all Brother International MFC-J6910dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Chapter 2 Paper settings 2 Paper Size and Type 2 To get the best print quality, set the machine for the type of paper you are using. You can use eight sizes of paper for printing copies: Letter, Legal, Ledger, A4, A5, A3, Executive and 4 6 in. (10 15 cm) and five sizes for printing faxes: Ledger, Letter, Legal, A3 or A4. When you load a different size of paper in the machine, you will need to change the paper size setting at the same time so your machine can fit an incoming fax on the page. a Press Tray Setting. b Press the displayed paper size or paper type for Tray#1, or press the displayed paper size for Tray#2. c Do one of the following: If you chose the paper size for Tray#1, press d or c to display the paper size options, and press Letter, Legal, Ledger, A4, A5, A3, EXE or 4"x6". If you chose the paper type for Tray#1, press Plain Paper, Inkjet Paper, Brother BP71, Brother BP61, Other Glossy or Transparency. If you chose Tray#2, press Letter, Legal, Ledger, A4, A3 or EXE. d Press Stop/Exit. Note • You can only use plain paper in Tray#2. • The machine ejects paper with the printed surface face up onto the paper tray in the front of the machine. When you use transparencies or glossy paper, remove each sheet at once to prevent smudging or paper jams. Tray use in COPY mode 2 You can change the default tray the machine will use for copies. Auto Select will allow your machine to feed paper from either Tray #1 or Tray #2, using the paper type and size settings from the COPY key menu. To change the default setting, follow the instructions below: a Press Tray Setting. b Press a or b on the Touchscreen to display Tray Use:Copy. c Press Tray Use:Copy. d Press Tray#1, Tray#2 or Auto Select. e Press Stop/Exit. Note You can temporarily change the paper size and tray selection for the next copy by using the COPY mode key. (See Paper Size on page 55 and Tray Select on page 56.) 22