Brother International MFC-J6910dw Users Manual - English - Page 250
How to set a new default, Black Start, Color Start, PHOTO CAPTURE, Stop/Exit
UPC - 012502627272
View all Brother International MFC-J6910dw manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 250 highlights
Chapter 8 d Press to Media. e Press d or c to display Auto Crop. f Press Auto Crop. g Press On. h If you do not want to change additional settings, press Black Start or Color Start to start scanning. i The number of the scanned documents appears on the LCD. Press OK. j Press d or c to preview each document data. k Press Save All to save the data. Note • Auto Crop is available for paper with right angles of 90 degrees at all four corners. If one of the angles is not square, Auto Crop cannot detect the document. • If your document is too long or wide, this setting does not work properly. • You must place the documents away from the edges of the scanner glass as shown in the illustration. • You must place the documents at least 0.4 in. (10 mm) apart from each other. • Auto Crop adjusts the skew of the document on the scanner glass, but if your document is skewed more than 10 degrees, this setting will not work. • The ADF must be empty to use the Auto Crop. • The Auto Crop feature is available for up to a maximum of 16 documents depending on the size of your documents. IMPORTANT DO NOT take out the memory card or USB Flash memory drive while PHOTO CAPTURE is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them. How to set a new default 8 You can save the Scan to Media settings (Quality, File Type, Glass Scan Size and Auto Crop) you use most often by setting them as the default settings. These settings will stay until you change them again. a Press (SCAN). b Press to Media. c Press d or c to display Set New Default. d Press Set New Default. e Press Yes to confirm. f Press Stop/Exit. 64