Brother International MFC-J6910dw Users Manual - English - Page 92

PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive PhotoCapture Center™ print settings 9 You can change the print settings for the next printing. These settings are temporary, and the machine returns to its default settings 3 minutes after printing, unless you have set the Mode Timer to 2 minutes or less. (See Mode Timer in chapter 1 of the Advanced User's Guide.) Note You can save the print settings you use most often by setting them as the default. (See Setting your changes as the new default in chapter 8 of the Advanced User's Guide.) How to scan to a memory card or USB Flash memory drive 9 You can scan black & white and color documents into a memory card or USB Flash memory drive. Black & white documents will be stored in PDF (*.PDF) or TIFF (*.TIF) file formats. Color documents may be stored in PDF (*.PDF) or JPEG (*.JPG) file formats. The factory setting is Color 200 dpi and the default file format is PDF. The machine automatically creates file names based on the current date. (For details, see the Quick Setup Guide.) For example, the fifth image scanned on July 1, 2011 would be named 07011105.PDF. You can change the color and quality. Quality Selectable File Format Color 100 dpi JPEG / PDF Color 200 dpi JPEG / PDF 9 Color 300 dpi JPEG / PDF Color 600 dpi JPEG / PDF B/W 100 dpi TIFF / PDF B/W 200 dpi TIFF / PDF B/W 300 dpi TIFF / PDF a Make sure you have put the memory card or USB Flash memory drive in the proper slot. IMPORTANT DO NOT take out the memory card or USB Flash memory drive while PHOTO CAPTURE is blinking to avoid damaging the card, USB Flash memory drive or the data stored on them. 61