Brother International PS-1250 Users Manual - Multi - Page 56
Appliques, Aplicaciones
View all Brother International PS-1250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
S3N01.9V0/7dV A SOW0S3001130 OSn SNOLLVOIlddV CINV SINTMOVI1V ONISII 6. Repeat this motion until the portion to be darned is filled with parallel lines of stitching. 6. Repita este operackin hasta que el zurcido se haya completed°, creando unas cuantas lineas de puntadas paralelas. Appliques Pattern Stitch Length F-2 An applique is created by cutting a contrasting piece of fabric into a shape to be used as a decoration on a garment or project. 1. Baste the cut design to the fabric in the location where desired. 2. Carefully sew around the edge of the cutout design with a Zigzag Stitch in the fine stitch length. 3. Cut away the surplus fabric outside of the stitching. 4. Remove the basting, if necessary. NOTE: Make reinforcing Straight Stitches at the beginning and the end of the stitching to secure. Aplicaciones Modelo Oe puntada Largo de puntada F-2 Siqueremos colocarunaplique depieletc. quehaga contraste, para utilizarla como decoracion en una prenda. 1. Hilvanela aplicacionrecortada altejido, endonde desee ponerla. 2. Cosa cuidadosamente los bordes del disetio con una puntada zigzag en un largo de puntada fino. 3. Recorte el tejido sobrante que quede fuera del pespunte. 4. Quite los hilvanes, si fuera necesario. NOTA: Haga unaspuntadas rectas como refuerzo alprincipio y al final de las puntadas para que no puedan deshacerse. 49